News
Industry Party 08
News from June 23, 2008
5 and 6 September 2008
Event - free entrance for everybody
www.industryparty.ch
News from June 23, 2008
5 and 6 September 2008
Event - free entrance for everybody
www.industryparty.ch
Polydec celebrates today its 2'000'000'000th part!
News from March 5, 2008
Today, March 5, 2008, at 15h38, we have produced our 2'000'000'000th part!
« It is an outstanding event... in 1985 - at the time of the foundation of Polydec - Jean-François and I were far from imagining to be able to hold our 2'000'000'000'000th part in our hands twenty years later. At that time, we produced 2'500'000 parts annually. We wanted to mark this event by inviting all our colleagues, without whom we would not have arrived at this result, to drink a glass of champagne. », said Mr. Claude Konrad, cofounder of the company this afternoon, with a smile in the corner of the lips.
News from March 5, 2008
Today, March 5, 2008, at 15h38, we have produced our 2'000'000'000th part!
« It is an outstanding event... in 1985 - at the time of the foundation of Polydec - Jean-François and I were far from imagining to be able to hold our 2'000'000'000'000th part in our hands twenty years later. At that time, we produced 2'500'000 parts annually. We wanted to mark this event by inviting all our colleagues, without whom we would not have arrived at this result, to drink a glass of champagne. », said Mr. Claude Konrad, cofounder of the company this afternoon, with a smile in the corner of the lips.
Polydec will exhibit at the Siams from May 20 to 24, 2008 in Moutier
11th trade fair for automation, machine tool and subcontracting
11th trade fair for automation, machine tool and subcontracting
A step more in the watch industry !
News from February 11, 2008
We have acquired a new machine more than a month ago to enrich our capability in the watch making field. This market continues to develop and our customers’ requirements are always increasing. Indeed, the parts of a watch mechanism continue to get smaller and require a high precision and a flawless surface quality. Our goal is to closely follow the technological developments to maintain the efficiency of our services.
News from February 11, 2008
We have acquired a new machine more than a month ago to enrich our capability in the watch making field. This market continues to develop and our customers’ requirements are always increasing. Indeed, the parts of a watch mechanism continue to get smaller and require a high precision and a flawless surface quality. Our goal is to closely follow the technological developments to maintain the efficiency of our services.
New buildings, new challenges !
News from October 30, 2007
We have been active in our new premises for a few weeks. The fleet of CNC machines has been increased by 30%. And that is not all... other machines are expected next month. Our first goals are to double our production and to reduce our delivery deadlines. With these objectives in mind, we also plan to recruit about ten new collaborators soon.
News from October 30, 2007
We have been active in our new premises for a few weeks. The fleet of CNC machines has been increased by 30%. And that is not all... other machines are expected next month. Our first goals are to double our production and to reduce our delivery deadlines. With these objectives in mind, we also plan to recruit about ten new collaborators soon.
A new fabrication facility to open soon
News from July 12, 2007
The work on the new facility is progesing well. Offices are planned to move the second part of August and the fabrication departments will move at the beginning of September. Additional CNC machines have been ordered . The new space and controlled climate system create an ideal environment for quality manufacturing
News from July 12, 2007
The work on the new facility is progesing well. Offices are planned to move the second part of August and the fabrication departments will move at the beginning of September. Additional CNC machines have been ordered . The new space and controlled climate system create an ideal environment for quality manufacturing
20 years at Polydec for Pietro Citro
June 1, 2007. Celebration at Polydec
20 year ago a very young Pietro began at Polydec as an engineer. At the time, Polydec was only two years old. After the two founders, Pietro is has been at Polydec the longest. He is certainly one of the most appreciated not only for his good humor but also for his capabilities. We look forward to the next 20 years!
June 1, 2007. Celebration at Polydec
20 year ago a very young Pietro began at Polydec as an engineer. At the time, Polydec was only two years old. After the two founders, Pietro is has been at Polydec the longest. He is certainly one of the most appreciated not only for his good humor but also for his capabilities. We look forward to the next 20 years!
Construction of the passageway between the 2 buildings.
News from April 24th, 2007
The building of the passageway between Polydec I and Polydec II started on Tuesday April 24th, 2007.
We wish to enter the new manufacturing department and offices during this summer.
In this way, the production surface will be more than doubled.
News from April 24th, 2007
The building of the passageway between Polydec I and Polydec II started on Tuesday April 24th, 2007.
We wish to enter the new manufacturing department and offices during this summer.
In this way, the production surface will be more than doubled.
New certificate OHSAS 18001
since September 2006
OHSAS 18001
This international private norm specifies the requirements of the management system with a goal of continual improvement regarding the Occupational Health and Safety.
since September 2006
OHSAS 18001
This international private norm specifies the requirements of the management system with a goal of continual improvement regarding the Occupational Health and Safety.
New building Polydec II
Rue de Longeau 18
Since January 2007, we own a new building. During year 2007, the manufacturing department as well as the administration will be relocated to this building. Initially, we have planned to increase the CNC screw-machine park by approx. ten machines in order to shorten delivery times.
Rue de Longeau 18
Since January 2007, we own a new building. During year 2007, the manufacturing department as well as the administration will be relocated to this building. Initially, we have planned to increase the CNC screw-machine park by approx. ten machines in order to shorten delivery times.
